Screwdriver and Bit Set 100 Piece

100 pc set consists of: 6 x slotted: 0.5 x 3.0 x 75 mm, 0.8 x 4.0 x 100 mm, 1.0 x 5.5 x 100 mm, 1.2 x 6.5 x 100 mm, 1.2 x 6.5 x 150 mm, 1.2 x 8.0 x 150 mm 6 x philips: PH0 x 75 mm, PH1 x 75 mm, PH1 x 100 mm, PH1 x 150 mm, PH2 x 100 mm, PH2 x 150 mm 3 x pozi: PZ0 x 75 mm, PZ1 x 75 mm, PZ2 x 100 mm 3 x torx: T20 x 75 mm, T25 x 100 mm, T30 x 100 mm 3 x square drive: S0 x 75 mm, S1 x 75 mm, S2 x 100 mm 2 x slotted: 0.4 x 2.5 x 50 mm, 0.5 x 3.0 x 50 mm 2 x philips: PH00 x 50 mm, PH0 x 50 mm 4 x torx: T6 x 50 mm, T7 x 50 mm, T8 x 50 mm, T10 x 50 mm 2 pc x offset screwdrivers: PH1 – SL1.0 x 5.0, PH2 – SL1.0 x 6.0 6 pc x nut driver bits with hex shaft: 6, 7, 8, 9, 10, 11 mm 1 pc x ratchet screwdriver 6.3 mm 60 pc x 25 mm bits SL: 0.5 x 3.0 - 0.5 x 3.0 - 0.8 x 4.0 - 0.8 x 4.0 - 1.0 x 5.0 - 1.0 x 5.0 - 1.0 x 5.0 - 1.0 x 6.0 - 1.0 x 6.0 - 1.0 x 6.0PH: PH0-PH0-PH1-PH1-PH1- PH2-PH2-PH2-PH3-PH3SQ: S0-S0-S1-S1-S1-S2-S2-S2-S3-S3TORX: T7-T8-T9-T10-T15-T20-T25-T27-T30-T40HEX: H2-H2.5-H3-H3-H4-H4-H5-H5-H5.5-H6PZ: PZ0-PZ0-PZ1-PZ1-PZ1-PZ2- PZ2-PZ2-PZ3-PZ3 2 pc x VDE screwdriver: Slotted: 0.8 x 4,0 x 100 mm, Phillips: PH1 x 80 mm ATTENTION! Only appropriately trained persons may work on electrical devices and systems.• VDE screwdrivers are specifically designed for working on electrical devices and systems.• They are not intended for mechanical jobs. Standard screwdrivers should be used for this purpose.• Store VDE screwdrivers separately from other tools to protect them from damage.• Only use the screwdrivers at temperatures between -20 °C and +70 °C.• The permissible voltage range of the screwdrivers according to EN 60900 is up to 1500V for DC voltage and up to 1000 V for AC voltage.