Parkside Digital Depth Gauge/ Inclinometer

(each)

For depth measurement of boreholes, milled and saw cuts, joints or tyre profiles

With a stand-alone frame and magnetic feet

Measurement regulator with a locking screw

Adjustable zero point at every measuring depth (reset)

INC or ABS mode selectable

Measured values optionally in mm or inches (inches in decimal or fraction representation)

Automatic switch-off after 5 minutes

Includes attachable borehole measuring rod, storage box, instructions and battery (1x 3V / CR2032)

Measuring range (gap): 0–80mm / 0–31/8"

Measuring range (borehole): 0–50mm / 0–2"

Accuracy: ± 0.1mm / ± 0.004"

Resolution: 0.05mm / 0.002"

Measured values optionally in degrees, percent, mm/m or in/ft

Includes instructions and battery (1x 1.5V / AAA)

Measuring range: 4 x 90º (0 - 360º)

Accuracy: ± 0.1º (at 0º and 90º) / ± 0.2º (other angles)

Resolution: 0.05º

3-year warranty