Hi ! Here's your regular-ish dose of awesome new stuff we've added to the store recently, including products from our Raspberry Pi, Maker and shiny new Home Automation store sections.
Fun fact - we now stock over 8,000 products, with more added every week! | | Argon ONE V5 M.2 NVMe Case for Pi 5 | | The latest case from Argon40, offering a single M.2 PCIe slot, active cooling, internal HAT space, built-in DAC with 3.5mm jacks, re-routed ports with full-size dual-HDMI, a range of optional expansion modules and more!
There's a standard version without the M.2 slot, and we also have the OLED add-on module in stock (the Zigbee/Dual NVMe add-ons are on the way!). | | Zooz 800-Series Z-Wave GPIO Module | | This is a GPIO Z-Wave gateway for your Raspberry Pi, compatible with Home Assistant (with the Z-Wave integration) and other compatible home automation software.
Pop this on your Pi (or HA Yellow), set it up in Home Assistant, then check out our Z-Wave section for a range of switches and sensors. | | | An affordable RP2040 Pico-format board, providing USB-C, BOOT and RESET buttons, debug header and their BConnect system connector.
The design also features non-intrusive UART - connecting an unassigned RP2040 pin to the debug connector, providing UART functionality without occupying any of the hardware pins. | | Relay Module for XIAO and QT Py | | Power Bank KeepAlive (Adjustable) | | This adjustable KeepAlive has a very similar circuit to the standard assembled version, however comes with a slide switch to adjust the strength of the pulse, to cater for awkward power sources and allow an even lower pulse power consumption. | | Barrel Jack Dual Supply - Dual Ideal Diodes | | | Add redundant power to mini PCs, routers, monitors, CCTV and other barrel jack-powered devices, using multiple power supplies!
Connect two power supplies and the module will draw power from the supply with the highest voltage. If the voltages equalise it will share the load over both power supplies. Clever. | | We're now stocking smart home products from Zooz!
They're best known for their Z-Wave USB gateway which is often recommended for Raspberry Pi Home Assistant users wanting to create a Z-Wave network.
Our pick of their sensors is their outdoor Z-Wave motion sensor, powered by simple CR123A batteries meaning no drilling holes or running wires. | | QuickFix JB-U Junction Box | | These handy junction boxes fit most Shelly devices inside and allow you to wire them up with WAGO connectors along with secure cable slots, for a tidy, safe installation.
Great for wiring 'at the device' if your home lacks neutral wires behind your switches. | | | The new WAGO Green Range consists of 77% bio-circular PC (housing) and at least 27% recycled PBT (levers), yet offers identical electrical performance to the standard versions.
We're offering these in the same handy 3-packs as always, to cater for small projects. | | | The Shelly Dimmer Gen3 is a smart dimming controller for remote control of dimmable lights and drivers that can be used with or without a neutral wire*. As it's a Gen3 device, it can also be used as a Bluetooth gateway for Shelly BLU devices.
*Precise measurement and power monitoring is only possible when used with neutral. A bypass is required when the device is used without neutral and the load is under 20W. | | Psst...for our customers in Scotland, we've recently improved our battery shipping, meaning we can now send most lithium products your way. Check out this page to learn more. | | | | |
